FixVault
Home › Ford › 2002 › Windstar Base › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling › Removal And Installation › Block Heater › Installation

Block Heater: Installation

    CAUTION: Make sure the power cable is routed and secured away from rotating or hot components or damage to the cable can occur.
    Fig 1: Installing Block Heater
    G03425344Courtesy of FORD MOTOR CO.
  1. To install, reverse the removal procedure.
  2. Fill the cooling system. Refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING  .
About FixVault