Component testing procedure
WARNING: This page is about a different car, the 2010 Mercury Mariner and 2010 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
POWER SEAT SWITCH, LEFT COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohm meter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Seat up/down circuit, rear | 4 and 7 | Up | Closed circuit |
| 5 and 2 | |||
| 4 and 5 | Down | Closed circuit | |
| 7 and 2 | |||
| Seat up/down circuit, front | 4 and 1 | Up | Closed circuit |
| 8 and 2 | |||
| 4 and 8 | Down | Closed circuit | |
| 1 and 2 | |||
| Seat forward rearward sensor | 4 and 3 | Forward | Closed circuit |
| 6 and 2 | |||
| 4 and 6 | Rearward | Closed circuit | |
| 3 and 2 |