FixVault
Home › Ford › 2002 › ZX2 Automatic › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System-General Information › General Procedures › Connecting Rod - Side Clearance

Connecting Rod - Side Clearance

  1. Measure the clearance between the connecting rod and the crankshaft. Verify the measurement is within specification.
    • Refer to the appropriate ENGINE article for the procedure.
    • If out of specification, install new components as necessary. Refer to the appropriate ENGINE article for the procedure.
    Fig 1: Measuring Clearance Between Connecting Rod And Crankshaft
    G02207456Courtesy of FORD MOTOR CO.
About FixVault