FixVault
Home › Ford › 2002 › ZX2 Automatic › Repair and Diagnosis › External Pages › Different car › Section 522 (Handles, Locks, Latches And Entry Systems) › General Procedures › Keyless Entry Keypad Code Programming

Keyless Entry Keypad Code Programming

WARNING: This page is about a different car, the 2004 Mercury Monterey and 2004 Ford Freestar. However, it is still accessible from the selected car via links, so may be relevant.
  1. Enter the permanent factory keyless entry keypad code.
  2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation will erase the stored customer code. The door locks lock, then unlock, confirming the code is erased.
  3. Within 5 seconds, enter the new 5-digit keyless entry keypad code. The door locks lock and unlock to confirm the new code is programmed.
About FixVault