Memory Seats

WARNING: This page is about a different car, the 2003 Mercury Mountaineer and 2003 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Memory Set Switch

Courtesy of FORD MOTOR CO.

This system allows automatic positioning of the driver seat to three programmable positions.

To program position one, move the driver seat to the desired position using the seat regulator control switch. Depress the set button. Within five seconds, depress button one.
To program position two, repeat the previous procedure using the set button and button two.
To program position three, repeat the previous procedure but depress the set button then buttons one and two simultaneously.
To recall position one, depress button one. To recall position two, depress button two. To recall position three, depress button one and two simultaneously.

A position can only be recalled when the transmission selector is in PARK or NEUTRAL. A position may be programmed at any time.