General Specifications
WARNING: This page is about a different variant/trim than selected.
General Specifications (Clearances, Tolerances & Adjustments)
| Description | mm | inches |
|---|---|---|
| Clearance, Tolerance and Adjustments | ||
| Maximum aluminum carrier spread | 0.25 | 0.010 |
| Backlash between ring gear and pinion teeth | 0.13-0.20 | 0.005-0.008 |
| Preferred backlash | 0.165 | 0.006 |
| Maximum backlash variation between teeth | 0.08 | 0.003 |
| Available drive pinion bearing adjustment shim in steps of 0.051 mm (0.002 inch) | 0.533-1.092 | 0.021-0.043 |