Torque Converter End Play Check: Check

Insert the special tools in the turbine.

Fig 1: Inserting Special Tools In Turbine
Courtesy of FORD MOTOR CO.
Tighten the center Collet of the tool.
Using the special tool, position the indicator button on the converter housing and set the dial at zero.

Fig 2: Tightening Center Collet Of Tool
Courtesy of FORD MOTOR CO.
Pull up on the special tool and observe the dial indicator reading.

Fig 3: Pulling Up Special Tool
Courtesy of FORD MOTOR CO.
If the end play exceeds specification, install a new or remanufactured torque converter.