FixVault
Home › Ford › 2003 › Excursion 7.3 F, RWD › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Body System - Full Frame And Body Mounting -- Excursion › Removal And Installation › Body Support-Rear, Regular Cab, Lower › Removal

Body Support-Rear, Regular Cab, Lower: Removal

  1. Move the front seat forward.
  2. Move the front seatback forward.
  3. If equipped, remove the utility tray behind the seat; for additional information, refer to INTERIOR TRIM & ORNAMENTATION -- EXCURSION & F250-F550 SUPER DUTY .
  4. Pull the carpet, or mat back to see the rear body insulator bolt head.
  5. Remove and discard the bolt.
    Fig 1: Locating Bolt
    G12743921Courtesy of FORD MOTOR CO.
  6. Remove the insulator.
    Fig 2: Locating Insulator
    G12743918Courtesy of FORD MOTOR CO.
About FixVault