FixVault
Home › Ford › 2003 › Excursion 7.3 F, RWD › Repair and Diagnosis › External Pages › Different car › Section 241 (Engine Cooling) › General Procedures › Cooling System Flushing › Procedure

Cooling System Flushing: Procedure

WARNING: This page is about a different car, the 2003 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
  2. Remove the water thermostat (8575). For additional information, refer to THERMOSTAT -2.0L Zetec  or THERMOSTAT -3.0L (4V) .
  3. Install the water hose connection (8592) without the water thermostat.
    4. NOTE: Refer to Pro Flush and Fill, Coolant Flush and Fill operating instructions for specific vehicle hook-up.
  4. Using the special tools, flush the engine and radiator.

    Use Motorcraft Premium Cooling System Flush VC-1 meeting Ford specification ESR-M14P7-A.

  5. Install the water thermostat.
  6. Backflush the heater core.
  7. Fill the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
About FixVault