Washer Hose Repair
WARNING: This page is about a different car, the 2003 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
- Locate and verify the leaking washer hose.
- Cut the hose cleanly and remove the damaged portion of the washer hose.
- Install a windshield washer hose adapter between the cut ends of the hose.
- Install a segment of 6.4 mm (0.25 in) i.d. black rubber hose over the ends of the washer hose, and clamp both ends of the rubber hose using spring clamps.
NOTE:
In difficult cases, clamping may be required.