General Specifications
WARNING: This page is about a different car, the 2004 Mercury Marauder, 2004 Mercury Grand Marquis, and 2004 Ford Crown Victoria. However, it is still accessible from the selected car via links, so may be relevant.
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Fluid | |
| MERCON® V is not interchangeable at this time with the current MERCON® service fluids. Check the transmission dipstick to determine the correct fluid and refer to owner publication to determine the correct service interval for the specific vehicle. | |
| Motorcraft MERCON® V Automatic Transmission Fluid XT-5-QM | MERCON® V |
| Fluid Capacities | |
| All | 12.1L (12.8 quarts) |
| Lubricants | |
| Multi-Purpose Grease ESR-M1C159-A | XL -5 |
GENERAL SPECIFICATIONS
| Item | Specification |
|---|---|
| Selective Thrust Washer - No. 1 | |
| Green thickness mm (inch) | 1.217-1.371 (0.050-0.054) |
| Yellow thickness mm (inch) | 1.727-1.828 (0.068-0.072) |
| Natural thickness mm (inch) | 2.159-2.260 (0.085-0.089) |
| Red thickness mm (inch) | 2.590-2.692 (0.102-0.106) |
| Blue thickness mm (inch) | 3.022-3.124 (0.119-0.123) |
| Forward Clutch Pack | |
| Clearance mm (inch) | 1.17-1.63 (0.046-0.068) |
| Snap ring thickness mm (inch) | 1.524-1.625 (0.060-0.064) |
| Snap ring thickness mm (inch) | 1.880-1.981 (0.074-0.078) |
| Snap ring thickness mm (inch) | 2.235-2.337 (0.088-0.092) |
| Snap ring thickness mm (inch) | 2.591-2.692 (0.102-0.106) |
| Reverse Clutch Pack | |
| Clearance mm (inch) | 1.27-1.94 (0.050-0.076) |
| Snap ring thickness mm (inch) | 1.524-1.625 (0.060-0.064) |
| Snap ring thickness mm (inch) | 1.880-1.981 (0.074-0.078) |
| Snap ring thickness mm (inch) | 2.235-2.337 (0.088-0.092) |
| Snap ring thickness mm (inch) | 2.591-2.692 (0.102-0.106) |
| Direct Clutch Pack | |
| Clearance mm (inch) | 1.574-2.159 (0.062-0.85) |
| Snap ring thickness mm (inch) | 1.270-1.372 (0.050-0.054) |
| Snap ring thickness mm (inch) | 1.625-1.727 (0.064-0.068) |
| Snap ring thickness mm (inch) | 1.981-2.083 (0.078-0.082) |
| Snap ring thickness mm (inch) | 2.337-2.438 (0.092-0.096) |
| Intermediate Clutch Pack | |
| Clearance mm (inch) | 41.7322-42.5958 (1.643-1.677) |
| Selective steel plates mm (inch) | 1.702-1.803 (0.067-0.071) |
| Selective steel plates mm (inch) | 1.956-2.057 (0.077-0.081) |
| Selective steel plates mm (inch) | 2.210-2.311 (0.087-0.091) |
| Selective steel plates mm (inch) | 2.464-2.565 (0.097-0.101) |