Speed Control Switches
The speed control system is operated by means of five switches on the steering wheel. The functions are:
When the ON switch is pressed and the vehicle is travelling at a speed greater than 48 km/h (30 mph) the speed control actuator will accept speed inputs.
The + (SET/ACC) switch is used to set or accelerate the vehicle at speeds above 48 km/h (30 mph). The switch can be used in three ways.
- Accelerate the vehicle with the accelerator pedal to the required speed, press and release the + (SET/ACC) switch, the vehicle will then maintain the required speed.
- Press the + (SET/ACC) switch and hold it down until the vehicle reaches the required speed. When released, the speed is stored in the memory and used to maintain the vehicle speed.
- Press the + (SET/ACC) switch repeatedly in order to increase the vehicle speed by increments of 1.6 km/h (1 mph).
The - (COAST) switch is used to reduce vehicle speed. The switch can be used in two ways:
- Press and hold the - (COAST) switch down until the vehicle slows to the required speed. When the switch is released, the speed is stored in the memory and used to maintain the vehicle speed.
- Press the - (COAST) switch repeatedly to reduce the vehicle road speed by increments of 1.6 km/h (1 mph).
Pressing the = (RESUME) switch returns the vehicle to the set speed when speed control is in the stand-by mode. Pressing and releasing the = (RESUME) switch at any speed greater than 48 km/h (30 mph) will return the vehicle to the previous set speed.
Pressing the OFF switch deactivates the speed control system. The speed setting stored in memory will be erased.