Switch - Key-In-Ignition Warning: Removal

Remove the ignition switch lock cylinder.
1. Insert the ignition key and turn to the RUN position
2. Insert a punch in the access hole of the steering column and press the release tab while pulling out the ignition switch lock cylinder.
Fig 1: Removing Ignition Switch Lock Cylinder
Courtesy of FORD MOTOR CO.
Remove the key-in-ignition warning switch.
1. Release the clip.
2. Push the key-in-ignition warning switch off the rear of the ignition switch lock cylinder.
  
  Fig 2: Removing Key-In-Ignition Warning Switch
  Courtesy of FORD MOTOR CO.