FixVault
Home › Ford › 2003 › Mustang Mach 1, Automatic › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System-General Information › General Procedures › Piston - Diameter

Piston - Diameter

  1. Measure the piston diameter 90 degrees from the piston pin at the point indicated. Refer to the appropriate ENGINE article for the procedure.
    • If out of specification, install new components as necessary. Refer to the appropriate ENGINE article for the procedure.
    Fig 1: Measuring Piston Diameter
    G01623428Courtesy of FORD MOTOR CO.
About FixVault