FixVault
Home › Ford › 2003 › Mustang Mach 1, Automatic › Repair and Diagnosis › Engine Performance › Fuel Delivery › Fuel System-General Information › General Procedures › Spring Lock Couplings › Connect

Spring Lock Couplings: Connect

    NOTE: Inspect and clean both the coupling ends. Lubricate the O-ring seals with clean engine oil.
    Fig 1: Connecting Fitting
    G01627907Courtesy of FORD MOTOR CO.
  1. Connect the fitting.
    • Pull on the fitting to make sure it is fully engaged.
    • Install the safety clip.
About FixVault