FixVault
Home › Ford › 2003 › Mustang Mach 1, Automatic › Repair and Diagnosis › External Pages › Different variant/trim › Section 3 (Engine-3.8L) › In-Vehicle Repair › Valve Tappets › Installation

Valve Tappets: Installation

WARNING: This page is about a different variant/trim than selected.
    NOTE: Lubricate the valve tappet with clean engine oil before installing.
    Fig 1: Installing Valve Tappets
    G01623598Courtesy of FORD MOTOR CO.
  1. To install, reverse the removal procedure.
About FixVault