FixVault
Home › Ford › 2003 › Mustang Mach 1, Standard › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System-General Information › General Procedures › Cylinder Head - Distortion

Cylinder Head - Distortion

Fig 1: Identifying Special Tool
G01623464Courtesy of FORD MOTOR CO.
  1. Use a straight edge and feeler gauge to inspect the cylinder head for flatness. If the cylinder head is distorted, install a new cylinder head.
    Fig 2: Inspecting Flatness Of Cylinder Head
    G01623465Courtesy of FORD MOTOR CO.
About FixVault