Anti-Lock Brake System (Abs) Module: Removal

NOTE:
The ABS module mounts to the HCU on a bracket on L/H inner fender well in engine compartment.

Remove the hydraulic control unit (HCU); refer to HYDRAULIC CONTROL UNIT - (HCU) .
Detach the bracket from the HCU.
1. Remove the bolts.
2. Detach the bracket from the HCU.
  
  Fig 1: Removing Bracket Bolts From HCU
  Courtesy of FORD MOTOR CO.
Remove the anti-lock brake control module.
1. Remove the screws.
2. Remove the anti-lock brake control module.
  
  Fig 2: Removing Anti-Lock Brake Control Module Screws
  Courtesy of FORD MOTOR CO.