Heater Blower Motor Resistor

The heater blower motor resistor (19A706) has the following features:

• The assembly is located in the passenger compartment on the heater core and evaporator core housing (19850) next to the blower motor assembly (19805).
• Three resistor elements are mounted on the resistor board to provide four blower motor speeds.
• Depending on the heater blower motor switch position, series resistance is added or bypassed in the A/C blower motor circuit to decrease or increase A/C blower motor speed.
• An overheating device (thermal limiter) will open the resistor coil when the temperature reaches 121°C (250°F) interrupting the blower motor operation in all speeds except high.
• The thermal limiter cannot be reset and is not serviceable