Removal and Installation

Remove the integrated control panel. For additional information, refer to CLIMATE CONTROL ASSEMBLY .
Remove the right-side lower instrument panel insulator.

Fig 1: Locating Right-Side Lower Instrument Panel Insulator
Courtesy of FORD MOTOR CO.
Open the glove compartment. Pressing the tabs inward, lower the glove compartment towards the floor.

Fig 2: Pressing Tabs Inward, Lower Glove Compartment Towards Floor
Courtesy of FORD MOTOR CO.
Remove the screw.

Fig 3: Locating Screw
Courtesy of FORD MOTOR CO.
Remove the screw.

Fig 4: Removing Screw
Courtesy of FORD MOTOR CO.
Disconnect the remote climate control (RCC) module electrical connector.

Fig 5: Locating Remote Climate Control (RCC) Module Electrical Connector
Courtesy of FORD MOTOR CO.
Remove the two nuts. Disconnect the plenum vacuum harness. Remove the RCC module (18C612).

Fig 6: Locating Plenum Vacuum Harness
Courtesy of FORD MOTOR CO.
To install, reverse the removal procedure.