Transmission Range Sensor: Installation
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2003 Lincoln Navigator, 2003 Lincoln Blackwood, 2003 Ford RV Cutaway, 2003 Ford Pickup, and 2003 Ford F550 Super Duty. However, it is still accessible from the selected car via links, so may be relevant.
- Install TR sensor onto manual control lever shaft. Install 2 retaining bolts, but do not tighten. Place TR sensor in neutral position (2 detent positions back from Park). Adjust TR sensor. See TRANSMISSION RANGE SENSOR under ADJUSTMENTS. After adjusting TR sensor, tighten retaining bolts to specification. See TORQUE SPECIFICATIONS .
- Install manual control lever to TR sensor and tighten nut to specification. See TORQUE SPECIFICATIONS . Connect shift cable to manual control lever. Install harness connector to TR sensor. Lower vehicle and connect negative battery cable. Activate air suspension, if equipped.