Oil Pump: Installation
WARNING: This page is about a different car, the 2003 Ford RV Cutaway, 2003 Ford Econoline, 2003 Ford E450 Super Duty, and 2003 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
- Clean and inspect the mating surfaces.
- Position the oil pump, and install the bolts loosely. Tighten the bolts in the sequence shown.
- Install the oil pan. For additional information, refer to OIL PAN .
- Install the crankshaft sprocket. For additional information, refer to TIMING DRIVE COMPONENTS - WINDSOR ENGINE (5.4L) or TIMING DRIVE COMPONENTS - ROMEO ENGINE (4.6L) .
CAUTION:
The oil pump must be primed prior to starting the engine.