FixVault
Home › Ford › 2003 › Windstar Base › Repair and Diagnosis › Steering › Power Steering › Power Steering System › Removal And Installation › Cooler - Fluid › Removal

Cooler - Fluid: Removal

NOTE: The transmission and power steering fluid cooler assembly (3F749) is shown in this procedure. The removal and installation of the other power steering fluid cooler (3D746) is similar.
  1. Disconnect the battery ground cable.
  2. Remove the front bumper (17757). For additional information, Refer to BUMPERS .
  3. Label and disconnect the power steering hose (3A713), power steering hose (3493) and the transmission fluid lines.
    Fig 1: Identifying Transmission Fluid Lines
    G01306417Courtesy of FORD MOTOR CO.
  4. Remove the bolts and the transmission and power steering fluid cooler assembly.
    Fig 2: Removing Power Steering Fluid Cooler Assembly
    G01306418Courtesy of FORD MOTOR CO.
About FixVault