Removal and Installation
WARNING: This page is about a different car, the 2006 Mercury Milan, 2006 Lincoln Zephyr, and 2006 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Center registers shown, outer registers similar.
- Open the register barrel vanes, grasp the inside of the register barrel and pull the register barrel straight out.
- Release the 3 tabs and remove the register housing.
- To install, reverse the removal procedure.
CAUTION:
To avoid damage to the instrument panel registers, rotate either left or right and pull straight out. Do not wiggle the register from side to side to free it.