FixVault
Home › Ford › 2004 › Escape 3.0 1, 4WD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System-General Information › General Procedures › Cylinder Block Distortion

Cylinder Block Distortion

Fig 1: Identifying Special Tool(s)
G02738624Courtesy of FORD MOTOR CO.
  1. Use a straight edge and a feeler gauge to inspect the cylinder block for flatness. If the cylinder block is distorted, install a new short block assembly.
    Fig 2: Inspecting Cylinder Block For Flatness
    G02738625Courtesy of FORD MOTOR CO.
About FixVault