FixVault
Home › Ford › 2004 › Excursion 5.4 L, 4WD › Repair and Diagnosis › External Pages › Different car › Section 1848 (Engine - 4.6L And 5.4L) › In-Vehicle Servicing › Valve Seals › Installation

Valve Seals: Installation

WARNING: This page is about a different car, the 2008 Ford RV Cutaway, 2008 Ford Econoline, 2008 Ford E450 Super Duty, and 2008 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Lubricate the valve seals with clean engine oil prior to installation.
  1. Using the special tools, install the new valve stem seal.
    2. Fig 1: Installing Seal
    GF0011654Courtesy of FORD MOTOR CO.
  2. Install the valve spring. For additional information, refer to Valve Springs .
About FixVault