FixVault
Home › Ford › 2004 › Explorer 4.0 E, AWD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System-General Information › General Procedures › Connecting Rod - Piston Pin Side Clearance

Connecting Rod - Piston Pin Side Clearance

  1. Measure the clearance between the connecting rod and the piston. Verify the measurement is within specification.
    • If out of specification, install new components as necessary.
    Fig 1: Measuring Clearance Between Connecting Rod And Piston
    G03180089Courtesy of FORD MOTOR CO.
About FixVault