FixVault
Home › Ford › 2004 › Explorer 4.0 E, AWD › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System-General Information › General Procedures › Cylinder Head - Distortion

Cylinder Head - Distortion

Fig 1: Identifying Special Tool
G03180111Courtesy of FORD MOTOR CO.
  1. Use a straight edge and a feeler gauge to inspect the cylinder head for flatness. If the cylinder head is distorted, install a new cylinder head.
    Fig 2: Inspecting Cylinder Head Using Straight Edge And Feeler Gauge
    G03180112Courtesy of FORD MOTOR CO.
About FixVault