Air Distribution Cable Control Assembly: Removal

Disconnect the battery ground cable. For additional information, refer to BATTERY, MOUNTING AND CABLES .
Remove the radio/cassette unit and the CD player (if equipped). For additional information, refer to AUDIO UNIT .
Remove the bezel with heater/air conditioning controls.

Fig 1: Removing Bezel With Heater/Air Conditioning Controls
Courtesy of FORD MOTOR CO.
Remove the bezel with heater/air conditioning controls (continued).
- Pull off seven electrical connectors (six shown).
Fig 2: Pulling Off Seven Electrical Connectors
Courtesy of FORD MOTOR CO.

NOTE: To remove the Bowden cables, turn the rotary switches as far as they will go to the left.

Fig 3: Uncoupling Bowden Cables

Courtesy of FORD MOTOR CO.

Remove the bezel with heater/air conditioning controls (continued).
- Unclip the Bowden cables.
Remove the lower driver's side footwell trim.

Fig 4: Removing Lower Driver'S Side Footwell Trim
Courtesy of FORD MOTOR CO.
Unclip and remove the air distribution Bowden cables.

Fig 5: Unclipping And Removing Air Distribution Bowden Cables
Courtesy of FORD MOTOR CO.
Unclip and remove the temperature control Bowden cables.
- Unclip and remove the temperature control Bowden cables.
Fig 6: Unclipping And Removing Temperature Control Bowden Cables
Courtesy of FORD MOTOR CO.