Control Assembly: Removal

Remove the center instrument panel register. For additional information, refer to AIR DISTRIBUTION & FILTERING .
Remove the screws.

Fig 1: Removing Control Head Screws
Courtesy of FORD MOTOR CO.
Disconnect the connectors.

Fig 2: Disconnecting Control Head Connectors
Courtesy of FORD MOTOR CO.
Using the special tool, disconnect the temperature control cable from the control head.

Fig 3: Disconnecting Temperature Control Cable
Courtesy of FORD MOTOR CO.
Remove the nuts and disconnect the vacuum connector.

Fig 4: Disconnecting Vacuum Connector
Courtesy of FORD MOTOR CO.