Removal And Installation: Module: Removal

WARNING: This page is about a different car, the 2003 Ford Mustang. However, it is still accessible from the selected car via links, so may be relevant.

Remove the hydraulic control unit (HCU). Refer to HYDRAULIC CONTROL UNIT .
Remove the pump motor electrical connector.

Fig 1: Removing Pump Motor Electrical Connector
Courtesy of FORD MOTOR CO.
Remove the anti-lock-brake control module screws.

Fig 2: Removing Anti-Lock-Brake Control Module Screws
Courtesy of FORD MOTOR CO.
Remove the anti-lock-brake control module from the HCU.