FixVault
Home › Ford › 2004 › Mustang Mach 1, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 11 (Automatic Transmission) › Disassembly And Assembly Of Subassemblies › Intermediate One-Way Clutch › Assembly

Intermediate One-Way Clutch: Assembly

WARNING: This page is about a different variant/trim than selected.
    NOTE: The intermediate one-way clutch must rotate counterclockwise when installed on the reverse clutch drum and will make a ratchet sound.
  1. Install the intermediate one-way clutch.
    1. Install the intermediate one-way clutch.
    2. Install the snap ring.
      Fig 1: Installing Intermediate One-Way Clutch
      G03241757Courtesy of FORD MOTOR CO.
About FixVault