FixVault
Home › Ford › 2005 › Cutaway 6.0 P › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System-General Information › General Procedures › Valve Spring Strength › Procedure

Valve Spring Strength: Procedure

  1. Use a Valve/Clutch Spring Pressure Gauge to check the valve spring for correct strength at the specified valve spring length.
    • Refer to appropriate ENGINE article for the procedure.
    • If out of specification, install new components as necessary. Refer to appropriate ENGINE article for the procedure.
      Fig 1: Checking Valve Spring Strength
      G03885056Courtesy of FORD MOTOR CO.
About FixVault