FixVault

Removal and Installation

  1. Remove the mode select switch (MSS) knob.
    Fig 1: Removing Mode Select Switch Knob
    G03909614Courtesy of FORD MOTOR CO.
  2. Remove the MSS plate.
    Fig 2: Removing Mode Select Switch Plate
    G03909615Courtesy of FORD MOTOR CO.
  3. Disconnect the wiring harness connector.
    Fig 3: Disconnecting Wiring Harness Connector
    G03909616Courtesy of FORD MOTOR CO.
  4. Remove the two screws and the MSS.
    Fig 4: Removing Mode Select Switch
    G03909617Courtesy of FORD MOTOR CO.
  5. To install, reverse the removal procedure.