Switch - Key-In-Ignition Warning: Removal

Remove the ignition switch lock cylinder.
1. Insert the ignition key and turn to the RUN position.
2. Insert a punch in the access hole of the steering column and press the release tab while pulling out the ignition switch lock cylinder.
Fig 1: Removing Ignition Switch Lock Cylinder
Courtesy of FORD MOTOR CO.
Remove the key-in-ignition warning switch.
1. Pry the clip downward.
2. Release the key-in-ignition warning switch from the rear of the ignition switch lock cylinder.
Fig 2: Removing Key-In-Ignition Warning Switch
Courtesy of FORD MOTOR CO.