FixVault
Home › Ford › 2005 › Excursion 5.4 L, RWD › Repair and Diagnosis › External Pages › Different variant/trim › Section 5 (Engine - 6.0L Diesel) › Disassembly And Assembly Of Subassemblies › Piston › Disassembly and Assembly

Disassembly and Assembly

WARNING: This page is about a different variant/trim than selected.
    NOTE: Mark the connecting rod and piston to make sure correct orientation on reassembly.
    Fig 1: Removing Piston Pin Retainers
    G03887617Courtesy of FORD MOTOR CO.
  1. Remove the piston pin retainers.
    2. NOTE: The piston pins are a floating type piston pin and should not require a press to remove or install them.
    Fig 2: Removing Connecting Rod
    G03887618Courtesy of FORD MOTOR CO.
  2. Remove the connecting rod.
    1. Remove the piston pin.
    2. Remove the connecting rod.
  3. To assemble, reverse the disassembly procedure.
About FixVault