Removal and Installation

Turn the steering wheel to the straight-ahead position and turn the ignition switch to the OF] position.
Remove the driver air bag module. For additional information, REFER to SUPPLEMENTAL RESTRAINT SYSTEM .
Remove and discard the steering wheel retaining bolt.

Fig 1: Removing Steering Wheel Retaining Bolt With Torque Specifications
Courtesy of FORD MOTOR CO.

CAUTION: Removing the steering wheel without using a puller can damage the column bearings.

Fig 2: Removing Steering Wheel

G03905127

Courtesy of FORD MOTOR CO.

Using the special tool, remove the steering wheel.
Remove the steering wheel while routing the wires from the clockspring through the steering wheel.
To install, reverse the removal procedure.

Fig 3: Installing Steering Wheel Retaining Bolt With Torque Specifications
Courtesy of FORD MOTOR CO.