Torque Specifications
TORQUE SPECIFICATIONS
| Description | Nm | lb-ft | lb-in |
|---|---|---|---|
| Center support fluid feed bolts | 33 | 24 | - |
| Front support-to-fluid pump | 31 | 22 | - |
| Coast clutch hub-to-overdrive carrier | 25a | 18a | - |
| Cooler line fitting-to-case | 48 | 35 | - |
| Extension housing-to-case | 47 | 35 | - |
| Parking rod guide plate-to-case | 25 | 18 | - |
| Line pressure plug-to-case | 12 | 9 | - |
| Solenoid body-to-case | 10 | - | 89 |
| Transmission fluid pan drain plug | 25 | 18 | - |
| Transmission fluid pan pan-to-case bolts | 18 | 13 | - |
| Output shaft retaining nut | 200 | 148 | - |
| Parking pawl abutment-to-case | 25 | 18 | - |
| Pump body-to-case | 27 | 20 | - |
| Power take off plate-to-case | 41 | 30 | - |
| Solenoid body and ditch plate-to-case | 10 | - | 89 |
| Transmission range sensor-to-case | 10 | - | 89 |
| Output shaft speed (OSS) sensor | 9 | - | 80 |
| Solenoid body electrical connector bolt | 5 | - | 44 |
| Turbine shaft speed (TSS) and intermediate shaft speed sensor | 9 | - | 80 |
| Transmission fluid cooler tube nut at case | 40 | 30 | - |
| Transmission flexplate cover | 35 | 26 | - |
| Torque converter-to-flexplate nut | 35 | 26 | - |
| Output shaft flange bolt | 135 | 100 | - |
| Shift cable bracket | 48 | 35 | - |
| Transmission-to-engine bolts | 47 | 35 | - |
| Fill tube-to-engine nut | 8 | - | 71 |
| Fill tube-to-engine stud | 8 | - | 71 |
| Dust cover-to-transmission | 9 | - | 80 |
| Transmission rear mount | 94 | 69 | - |
| Transmission support crossmember to frame | 81 | 60 | - |
| a = Plus 90 degrees. | |||