FixVault
Home › Ford › 2005 › Expedition RWD › Repair and Diagnosis › Electrical › Gauges › Information Center › General Procedures › Compass Calibration - With Message Center

Compass Calibration - With Message Center

    NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential electrical accessories (rear window defrost, heater A/C, map lamps, wiper, etc.) and make sure all the doors are closed.
  1. Start the vehicle.
  2. Press the RESET control button to start the compass calibration function.
  3. Slowly drive the vehicle in a circle (less than 5 km/h ) until the CIRCLE SLOWLY TO CALIBRATE display changes to CALIBRATION COMPLETE. It will take up 5 circles to complete the compass calibration.
About FixVault