Cooling System Flushing
WARNING: This page is about a different car, the 2006 Lincoln Navigator and 2006 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOL(S)
| Coolant System Drain/Flush/Fill 164-R3673 or equivalent |
|
| Flush Kit 164-R3658 |
|
| Drain Kit 164-R3662 or equivalent |
MATERIAL SPECIFICATION
| Item | Specification |
|---|---|
| Premium Cooling System Flush VC-1 | ESR-M14P7-A |
- Drain the engine cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
- Remove the thermostat.
- Install the thermostat housing without the thermostat.
- Use cooling system Flush-All, Flush Kit Hardware Package and Drain kit to flush the engine and radiator.
Use Premium Cooling System Flush VC-1 meeting ford specification ESR-M14P7-A.
- Install the thermostat.
- Fill and bleed the cooling system. For additional information, refer to COOLING SYSTEM DRAINING, FILLING AND BLEEDING .
WARNING:
To avoid personal injury, do not remove the coolant pressure relief cap while the engine is operating or hot. The cooling system is under pressure; steam and hot liquid can come out forcefully when the cap is loosened slightly. Failure to follow these instructions may result in personal injury.
NOTE:
For additional information, refer to the cooling system Flush-All Operating Instructions for specific vehicle hook-up.