FixVault
Home › Ford › 2005 › Expedition RWD › Repair and Diagnosis › External Pages › Different car › Section 444 (HVAC Climate Control System) › Removal And Installation › Function Selector Switch › Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2006 Lincoln Navigator and 2006 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the climate control assembly. For additional information, refer to CLIMATE CONTROL ASSEMBLY - EXPEDITION .
  2. Pull and remove the function selector switch knob.
  3. Release the 2 clips and remove the function selector switch.
  4. To install, reverse the removal procedure.
About FixVault