Selector Lever Indicator Adjustment
WARNING: This page is about a different car, the 2006 Lincoln Navigator and 2006 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument cluster finish panel. For additional information, refer to REMOVAL AND INSTALLATION .
- Place the transmission control selector lever in the (D) position.
- Rotate the transmission control selector lever clockwise until it bottoms out (first gear), then rotate two detents counterclockwise ((D) position).
- Hang a three pound weight on the transmission control selector lever.
- Center the pointer in the middle of the (D) position.
- Rotate the thumbwheel located on the bottom of the steering column to adjust the pointer.
- Remove the three pound weight.
- Carefully move the shift control selector lever from detent to detent and compare with transmission settings.
- Readjust if necessary.
- Install the instrument cluster finish panel. For additional information, refer to REMOVAL AND INSTALLATION .