FixVault
Home › Ford › 2005 › Explorer 4.6 W, RWD › Repair and Diagnosis › Brakes › Traction Control › Anti-Lock Brake System Control › Removal And Installation › Stability Traction Control Switch › Removal and Installation

Removal and Installation

Fig 1: Exploded View Of Stability Traction Control Switch
G03944875Courtesy of FORD MOTOR CO.
  1. Remove the center console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE .
  2. Disconnect the stability traction control switch electrical connector and the stability traction control switch.
  3. To install, reverse the removal procedure.
About FixVault