Rivet Replacement
NOTE:
Rivets that are removed will be replaced with the next larger size bolts.
- Drill a bolt hole in the support and the frame.
- Line drill a hole the size of the bolt through the old rivet hole (that is, for 11.1 mm diameter rivets, use a 12.7 mm drill).
- Position the support.
- Install the bolts, nuts and washers (Property Class 9.8 metric ) in the drilled holes. For additional information, refer to the SPECIFICATION CHART .
- Tighten the bolts.
CAUTION:
Drill only where a rivet was removed.