FixVault
Home › Ford › 2005 › Freestar Base › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › Disassembly And Assembly Of Subassemblies › Drive Sprocket/Turbine Shaft › Assembly

Drive Sprocket/Turbine Shaft: Assembly

  1. Make sure that the seals are mated correctly.
    Fig 1: Identifying Seal Ring Mating
    G03957047Courtesy of FORD MOTOR CO.
  2. Install the drive sprocket/turbine shaft seal and O-ring.
    • Install the drive sprocket/turbine shaft O-ring.
    • Install the drive sprocket/turbine shaft seal.
    Fig 2: Installing Drive Sprocket/Turbine Shaft Seal And O-Ring
    G03957116Courtesy of FORD MOTOR CO.
  3. Install the turbine shaft front seal.
    Fig 3: Installing Turbine Shaft Front Seal
    G03957118Courtesy of FORD MOTOR CO.
  4. Make sure that the seal is locked correctly.
    Fig 4: Identifying Seal Locking Condition
    G03957122Courtesy of FORD MOTOR CO.
About FixVault