FixVault
Home › Ford › 2006 › Crown Victoria Base, 4.6 W › Repair and Diagnosis › Engine Mechanical › Mechanical › Engine System › In-Vehicle Repair › Flexplate › Installation

In-Vehicle Repair: Flexplate: Installation

  1. Position the flexplate and loosely install the 6 bolts. Tighten the bolts in the sequence shown to 80 Nm (59 lb-ft).
    Fig 1: Installing Flexplate Bolts
    G04583533Courtesy of FORD MOTOR CO.
  2. Install the transmission. For additional information, refer to AUTOMATIC TRANSAXLE/TRANSMISSION .
    3. WARNING: If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to FIRE SUPPRESSION SYSTEM .
  3. If equipped with fire suppression system, repower the system.
About FixVault