FixVault
Home › Ford › 2006 › Crown Victoria Base, 4.6 W › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission › In-Vehicle Repair › Overdrive Servo › Installation

Overdrive Servo: Installation

  1. Install the overdrive servo piston assembly.
    1. Install the overdrive servo piston return spring.
    2. Install the overdrive servo piston assembly.
      Fig 1: Installing Overdrive Servo Piston Assembly
      G04584402Courtesy of FORD MOTOR CO.
  2. Use the special tool to install the overdrive servo piston retaining ring.
    Fig 2: Installing Overdrive Servo Piston Retaining Ring
    G04584403Courtesy of FORD MOTOR CO.
  3. Install the main control valve body. For additional information, refer to MAIN CONTROL VALVE BODY .
    4. WARNING: If equipped with fire suppression system, repower the system. For important safety warnings and procedures, refer to FIRE SUPPRESSION SYSTEM .
  4. If equipped with fire suppression system, repower the system.
About FixVault