Speed Control Deactivator Switch: Installation
WARNING: This page is about a different car, the 2005 Lincoln Navigator and 2005 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
The speed control deactivator switch is self-adjusting. Do not pull up or push down on the pedal during installation. The switch will only self-adjust one time and allows for only the initial installation. If further adjustments become necessary, a new switch must be used.
- Install the speed control deactivator switch, and rotate clockwise 45 degrees.
- Connect the speed control deactivator switch electrical connector.