Toe Adjustment - Rear

Jounce the vehicle to make sure that the suspension is in its normal resting position.
Using alignment equipment and the manufacturer's instructions, measure the toe.
With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING .
Loosen the rear lower arm adjustment cam nut.

Fig 1: Locating Rear Lower Arm Adjustment Cam Nut
Courtesy of FORD MOTOR CO.
Adjust the toe setting by rotating the nut and eccentric washer.

Fig 2: Rotating Nut And Eccentric Washer For Toe Setting
Courtesy of FORD MOTOR CO.
Tighten the rear lower arm adjustment cam nut to 90 Nm (66 lb-ft).

Fig 3: Locating Rear Lower Arm Adjustment Cam Nut
Courtesy of FORD MOTOR CO.
Recheck the toe settings, adjust as necessary.