Removal and Installation

WARNING: This page is about a different car, the 2010 Mercury Milan, 2010 Lincoln MKZ, and 2010 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.

If installing a new Headlamp Control Module (HCM), upload the module configuration information to the scan tool. For additional information, refer to MODULE CONFIGURATION .
Disconnect the HCM electrical connector.
Remove the 2 pin-type retainers and the HCM.
To install, reverse the removal procedure.
- If installing a new HCM, download the HCM configuration information from the scan tool into the new HCM. For additional information, refer to PROGRAMMABLE MODULE INSTALLATION (PMI) .